Loading...FM 2-6
C7310FM PAR Lamp to 250WFlush Mount Directional 5 7/8" Round Conoid Aperture |
| Model | Application | Style | Aperture | Length | Width | Depth | Cut Out Dimensions |
Lamp | Wattage | Page | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C7310FM | Directional | Conoid | 5 7/8" | 15 1/2" | 16" | 10 1/8" | 6 15/16" | PAR-30, PAR-38 | 45W-250W | FM 2-6 | |
 |
 |
 |
|||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | |||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
Illuminate vertical or horizontal surfaces with low aperture brightness and excellent lamp shielding. Use for vertical downlighting in sloped ceilings or for directional highlighting.
Design Features
This directional fixture rotates 360° and tilts 45°. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Specular clear Alzak cones are standard. Optional colors and Softglow® finishes are available. The back of each cone is painted black to prevent light streaks. Housing and structural parts are painted optical matte black.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
| STC | Straight top cone. |
Electrical | |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FF30-2 | Accessory holder for PAR-30. Holds two accessories. |
| FF38-1 | Accessory holder for PAR-38. Holds one accessory. For tilts from 10° to 45° angulation only. |
| FF38-2 | Accessory holder for PAR-38. Holds two accessories. For tilts from 10° to 45° angulation only. Requires shallower CDC cut down cone. |
| FR | Frosting on lens, specify lens type. |
| HL | Hexcell Louver. (Requires accessory holder) |
| LL | Linear Lens. (Requires accessory holder) |
| LP | Large Prism lens (Requires accessory holder) |
| MP | Microprism lens. (Requires accessory holder) |
Specular Cones & Bright Trims | |
| B | Black cone. |
| G | Gold cone. |
| H | Mocha cone. |
| P | Graphite cone. |
| T | Titanium cone. |
| W | Wheat cone. |
| Y | Pewter cone. |
| Z | Bronze cone. |
Softglow® Cones & Trims | |
| S | Softglow® finishes: add S before color letters. e.g. SC for Softglow® clear cone. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
