Loading...FMH 4-3
H8443FM One 26 or 32W Triple Tube CFLFlush Mount Shallow Depth Downlight 4 1/2" Square Parabolic Trim |
| Model | Application | Style | Aperture | Length | Width | Depth | Cut Out Dimensions |
Lamp | Wattage | Page | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H8443FM | Downlight | Square | 4 1/2" | 14 1/4" | 19 7/8" | 5 3/8" | 5 27/32" | Triple Tube Compact Flourescent | 26W or 32W | FMH 4-3 | |
 |
 |
 |
|||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | |||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
The socket is mounted horizontally in an ellipsoidal primary reflector reducing recessed depth requirements for shallow plenums. Use in low to medium height ceilings.
Design Features
The fixture can use 26 or 32W triple tube lamps interchangeably. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housings and structural parts are painted matte black to suppress stray light leaks. Standard trims are anodized Softglow® clear. Special finishes and colors are available.
Ballast
Programmed rapid start, microprocessor controlled for rated lamp life and end of lamp life protection. Input voltage range is from 120V- 277V. Operates 26W or 32W triple tube lamps. Power factor .98. Starting temperature 0°F (-18°C), THD <10%.
General
Fixture is pre-wired, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring.Union made IBEW.
Accessories
Mechanical | |
| FC | Four cell cross baffles (Baffle FC not available with Ball Peen texture). |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| BD | Ballast disconnect. |
| DM | 5% Lutron SE. Specify watts and volts. |
| DM1 | 1% Lutron. Specify watts and volts. |
| DM7 | 3% Advance Mark 7. Specify watts and volts. |
| DMD | Dali Dim. Specify watts and volts. |
| DME | ECO Lutron. Specify watts and volts. |
| DMT | Tu-wire Lutron. Specify watts and volts. |
| DMX | 7% Advance Mark X. Specify watts and volts. |
| EM | Emergency power includes integral charger light and test switch visible through aperture. Battery operation for 90 minutes. |
| EMB | Bodine remote. |
| EMBH | Bodine remote high output. |
| F | Ballast fuse. |
| V347 | 347V ballast. |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FLT4 | Full lens trim 4", specify lens type. |
| FR | Frosting on lens, specify lens type. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
| MP | Microprism lens. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
