FMH 6-2
H8456FM One 20W to 75W MR-16 Low Voltage LampFlush Mount Wall Washer 4 1/2" Square Parabolic Trim |
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
A kicker reflector and microprism spread lens with an MR-16 flood create a visually even pattern from fixtures on indicated spacings.
Design Features
A proprietary lampholder features a ceramic socket, aluminum heat sink and reflective heat shield. It tilts for relamping while maintaining aiming position. Stainless steel springs retain the lamp. The optics can be rotated 360° in 90° increments to correct orientation to the wall. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Structural parts are painted matte black to suppress stray light leaks. Standard trim is anodized Softglow® clear.
Transformer
A magnetic transformer for MR-16 lamps up to 75W is standard. Primary lead is 120V with a 12V secondary. The transformer is rated 180°C, Class H with a built-in 150°C resetting thermal link fuse. It can be lowered through the aperture for service. Maximum fixture draw is 85W.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| ET1 | Electronic transformer 120V to 12V. |
| ET2 | Electronic transformer 277V to 12V. |
| F | Ballast fuse. |
| V277 | Transformer, 277V to 12V. |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FR | Frosting on lens, specify lens type. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
Loading...