Loading...FMH 6-12
H8651FM One 70-100W PAR-38 Metal Halide LampFlush Mount Wall Washer 6" Square Parabolic Trim |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| H8651FM | Wall Washer | 6" | 14 3/4" | 19 7/8" | 9 1/4" | 7 5/16" | PAR-38 MH | 4800 to 6800 |
70W-100W |
FMH 6-12 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
A kicker reflector and microprism spread lens shape the output from a PAR-38 MH flood into a visually even pattern from fixtures on indicated spacings.
Design Features
A vented housing encloses optical and electrical components. After the fixture is installed, its optics are adjustable in 90° increments through 360° to insure correct orientation to the wall. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housing is painted optical matte black to suppress light leaks. Standard trim is anodized Softglow®clear. Other colors and finishes are available.
Ballast
Integral, encased, electronic ballast is standard. Features quiet operation, thermal protection and lamp shutdown at end of life. Input voltage is 120Vor 277V, power factor is >.90.
General
Fixtures are pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| AOE1 | Ballast 120V, auto-on restrike system, 75W max. |
| AOE2 | Ballast 277V, auto-on restrike system, 75W max. |
| F | Ballast fuse. |
Lenses & Filters | |
| FR | Frosting on lens, specify lens type. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
