Loading...FMH 6-8
H8656FM One 20-75W MR-16 Low Voltage LampFlush Mount Wall Washer 6" Square Parabolic Trim |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| H8656FM | Wall Washer | 6" | 14 1/4" | 15" | 7 1/4" | 7 5/16" | MR-16 Low Voltage | 360 to 1202 |
20W-75W |
FMH 6-8 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
Lamp and kicker reflector direct light through a microprism spread lens creating a visually even plane of light from fixtures on indicated spacings.
Design Features
A vented steel housing is standard. A proprietary lampholder features a ceramic socket, aluminum heat sink, reflective heat shield and tilts for relamping. Stainless steel springs retain the lamp. After installation, optics can rotate 360° in 90° increments to correct orientation. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling from 3/8" to 7/8" thick. Maximum extension is 26". Bottom service only.
Finish
Housing and structural parts are painted matte black to suppress stray light leaks. Standard trim is anodized Softglow® clear.
Transformer
Each fixture is supplied with a magnetic transformer for MR-16 lamps up to 75W. The primary lead is 120V with a 12V secondary. The transformer is rated 180°C, Class H with a built-in 150°C resetting thermal link fuse. Maximum fixture draw is 85W.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| ET1 | Electronic transformer 120V to 12V. |
| ET2 | Electronic transformer 277V to 12V. |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FR | Frosting on lens, specify lens type. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
