Loading...H42b
H8657 G8.5 Base, T4.5 Metal Halide, 20W to 150WH8659 G12 Base, T4.5, T6 Metal Halide, 20W to 150WHigh Ceiling Long Throw Wall Washers, 6" Square Parabolic Trims |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| H8657 | Wall Washer | 6" | 18 1/8" | 16 7/8" | 9 1/2" | 6 21/32" | T4.5 Metal Halide Lamp, G8.5 Base | 1600 to 6200 |
20W-70W |
H42b |
| H8659 | Wall Washer | 6" | 18 1/8" | 16 7/8" | 9 1/2" | 6 21/32" | T4.5, T6, T7 Metal Halide, G12 Base | 1600 to 6200 |
20W-70W |
H42b |
| H8659-150 | Wall Washer | 6" | 18 1/8" | 16 7/8" | 9 1/2" | 6 21/32" | T4.5, T6, T7 Metal Halide, G12 Base | 13500 |
150W |
H42b |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Optics and Applications
The wall washer combines the aesthetic appeal of a square aperture that optimizes the performance of metal halide lamps and minimizes the potential for glare. The vertical mounted reflector produces a smooth pattern with soft feathered edges. Use with high ceilings or to push light toward the middle to bottom of a wall.
Design Features
A sturdy steel housing protects the optical system and assures proper focal position. A frosted microprism glass lens is standard. Optics are rotatable to 360° in 90° increments. The trim is stabilized to prevent racking and is held to the ceiling by constant pressure springs. Maximum ceiling thickness 7/8". Top or bottom service.
Finish
Housings and structural parts are painted matte black to suppress light leaks. The shielding trim is Softglow® clear. A variety of special finishes, textures and colors are available. Refer to Squares brochure for descriptive photos.
Ballasts
Electronic metal halide ballasts provide constant output. Thermal protection with auto reset, quiet operation and automatic shutdown at end of life. For emergency back-up system contact factory.
Bases
Product performance is dependant on quality sockets to provide reliable contact to the lamp. Kurt Versen uses sockets with redundant spring systems to retain the lamps.
General
Fixtures are pre-wired, thermally protected, UL and C-UL listed for eight wire 75°C branch circuit wiring. All products are union made IBEW. Suitable for damp locations.
Accessories
Mechanical | |
| FMH6 | 6" Square flush mount construction. |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| AOE1 | Ballast 120V, auto-on restrike system, 75W max. |
| AOE2 | Ballast 277V, auto-on restrike system, 75W max. |
| EC | Emergency circuit with mini-can sockets and leads. |
| F | Ballast fuse. |
| GU | For GU6.5 base, T4 MH lamp. |
Lenses & Filters | |
| LL | Linear Lens. |
| LP | Large Prism lens. |
| UV | UV Filter. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
| GG | Upper gold reflector. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
