Model	Application	Aperture	Length	Width	Depth	Cut Out Dimensions	Source	Lumens	Wattage	Page
K7301	Downlight	4 1/8"	14 1/4"	14 1/4"	6"	4 5/8"	MR-16 Low Voltage Lamps	360 to 1202	20W-75W	K2
Click image to enlarge				Click image to enlarge				Click image to enlarge

Optics and Applications

The parabolic cone provides excellent shielding and brightness control. The selection of MR-16 lamps offers beam spreads from 7° to 40°. Use wherever a tightly controlled pattern is required. Ideal for highlighting merchandise, art objects and points of interest.

Design Features

MR-16 lamps generate substantial heat. Kurt Versen’s proprietary lampholder assembly has a pronged aluminum heat sink and a reflective shield to divert heat from the bi-pin socket. The lampholder assembly accommodates up to two accessories. It swivels to facilitate relamping. Stainless steel springs hold the lamp firmly in place. Maximum ceiling thickness 7/8". Top or bottom service.

Finish

A specular clear Alzak cone is standard. Optional colors and Softglow® finishes are available. Housing and structural parts are painted optical matte black to suppress stray light leaks. Steel parts are phosphate conditioned for corrosion resistance before painting.

Transformer

Each fixture has a transformer capable of accommodating MR-16 lamps up to 75W. The primary lead is 120V with a 12V secondary. The transformer is rated 180°C, Class H with a built-in 150°C thermal reset. It can be lowered through the aperture for service. Maximum fixture draw is 85W.

General

Fixtures are pre-wired and thermally protected, UL and C-UL listed for eight wire 75°C branch circuit wiring. Union made IBEW. Luminaire Efficiency Ratings (LER) do not apply to low voltage fixtures.

Accessories

IES Files

Contact factory for Photometric Data

BIM Files

Please contact Kurt Versen to request Building Information Modeling (BIM) files.