Loading...FM 2-4
R7408FM PAR-20 Metal Halide, 20-39WFlush Mount Directional 4 1/8" Round Conoid Aperture |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| R7408FM | Directional | 4 1/8" | 16 1/2" | 17 1/2" | 7 1/2" | 5 1/8" | PAR-20 MH Spot or Flood | 1000 to 2300 |
20W-39W |
FM 2-4 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail. It is a factory installed option with a proven installation technique.
Optics and Applications
The shielding cone controls brightness from intense HID lamps through the complete range of aiming angles.
Design Features
The lampholder assembly rotates 360°, tilts 45° and locks into position. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
A specular clear Alzak cone is standard. Optional colors and Softglow® finishes are available.
Ballast
Integral, encased, electronic ballast is standard. Features quiet operation, thermal protection, and lamp shutdown at end of life. Input voltage is 120V or 277V, power factor >.90.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
| STC | Straight top cone. |
Electrical | |
| AOE1 | Auto-On restrike HID electronic 120V (Uses 60W max auxiliary incandescent lamp). |
| AOE2 | Auto-On restrike HID electronic 277V (Uses 60W max auxiliary incandescent lamp). |
| EC | Emergency circuit with mini-can sockets and leads. |
| F | Ballast fuse. |
| TLI | Mini-can incand. lamp, 60W. |
| V347 | 347V ballast. |
Lenses & Filters | |
| FF20-8 | Accessory holder for PAR-20. Tilts from 25° to 40°. Holds two accessories. Not available with EC or AO. |
| FR | Frosting on lens, specify lens type. |
| HL | Hexcell Louver. |
| LL | Linear Lens. (Requires accessory holder) |
| LP | Large Prism lens (Requires accessory holder) |
| MP | Microprism lens. (Requires accessory holder) |
Specular Cones & Bright Trims | |
| B | Black cone. |
| G | Gold cone. |
| H | Mocha cone. |
| P | Graphite cone. |
| T | Titanium cone. |
| W | Wheat cone. |
| Y | Pewter cone. |
| Z | Bronze cone. |
Softglow® Cones & Trims | |
| S | Softglow® finishes: add S before color letters. e.g. SC for Softglow® clear cone. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
