Model	Application	Aperture	Length	Width	Depth	Cut Out Dimensions	Source	Lumens	Wattage	Page
K7411FM	Directional	4 1/8"	18 3/8"	19 3/8"	7 3/4"	5 1/8"	AR111, PAR-36	350 to 1250	25W-75W	FM 2-3
Click image to enlarge				Click image to enlarge				Click image to enlarge

Flush Mount

Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.

Optics and Applications

The parabolic cone provides shielding and brightness control in directional applications. Use also for vertical downlighting in sloped ceilings. Ideal for highlighting merchandise, art objects and other points of interest.

Design Features

The lamp assembly rotates 360° and tilts 40°. Positive locking maintains focusing during relamping. The cone is retained by a torsion spring and rotates with the lamp to maintain position. The lamp can be aimed and locked, then fine-tuned with a threaded turnbuckle. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.

Finish

A specular clear Alzak cone is standard. Optional colors and Softglow® finishes are available. Structural parts are painted optical matte black to suppress light leaks.

Transformer

Each fixture has a magnetic transformer with 120V primary as standard. A voltage switch provides secondary output of 12V or 5.5V as required. The transformer is rated 180°C Class H with a built-in 150° thermal reset. It is accessible through the aperture.

General

Fixtures are pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.

Accessories

IES Files

Contact factory for Photometric Data

BIM Files

Please contact Kurt Versen to request Building Information Modeling (BIM) files.