Model	Application	Aperture	Length	Width	Depth	Cut Out Dimensions	Source	Lumens	Wattage	Page
K7430	Directional	4 1/8"	14 1/4"	14 1/4"	6"	4 5/8"	MR-16 Low Voltage Lamps	360 to 1202	20W-75W	K3
K7431	Directional	5 7/8"	14 1/4"	14 1/4"	7 1/2"	6 9/32"	MR-16 Low Voltage Lamps	360 to 1202	20W-75W	K3
Click image to enlarge				Click image to enlarge				Click image to enlarge

Optics and Applications

The parabolic cone provides shielding and brightness control in directional applications and for vertical downlighting in sloped ceilings. The broad selection of MR-16 lamps offers beam spreads from 7° to 40°, ideal for highlighting merchandise, art objects and points of interest.

Design Features

The lampholder assembly rotates 360°. Angulation to 45° on K7430, to 40° on K7431. Rotation and angulation locks assure permanent positioning. The cone rotates with lamp aiming for constant alignment. The lampholder assembly has a pronged aluminum heat sink and a reflective shield to divert heat from the bi-pin socket. The entire hinged assembly drops for relamping. Stainless steel springs hold the lamp firmly in position. Maximum ceiling thickness 7/8". Top or bottom service.

Finish

A specular clear Alzak cone is standard. Optional colors and Softglow® finishes are available. Housing and structural parts are painted optical matte black to suppress stray light leaks. Steel parts are phosphate conditioned for corrosion resistance before painting.

Transformer

Each fixture has a transformer capable of accommodating MR-16 lamps up to 75W. The primary lead is 120V with a 12V secondary. The transformer is rated 180°C, Class H with a built-in 150°C thermal reset. It can be lowered through the aperture for service. Maximum fixture draw is 85W.

General

Fixtures are pre-wired and thermally protected, UL and C-UL listed for eight wire 75°C branch circuit wiring. Union made IBEW. Luminaire Efficiency Ratings (LER) do not apply to low voltage fixtures.

Accessories

IES Files

Contact factory for Photometric Data

BIM Files

K7430.RFA