FM 2-2
K7430FM MR-16 Low Voltage LampFlush Mount Directional Downlight 4 1/8" Round Conoid Aperture |
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
MR-16 lamps provide a wide range of beam patterns. Specify for accent and display lighting.
Design Features
The lamp rotates 360°, tilts 45° and locks into position. A proprietary lampholder features a ceramic socket, aluminum heat sink and reflective heat shield. It accepts two accessories and tilts for relamping while maintaining its aiming position. Stainless steel springs retain the lamp. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceilings from 3/8" to 7/8" thick. Maximum extension is 26". Top or bottom service.
Finish
A specular clear Alzak cone is standard. Optional colors and Softglow® finishes are available.
Transformer
Each fixture has a magnetic transformer for MR-16 lamps up to 75W.The primary lead is 120V with a 12V secondary. The transformer is rated 180°C Class H with a built-in 150°C thermal reset. It is accessible through the aperture. Maximum fixture draw is 85W.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
| STC | Straight top cone. |
Electrical | |
| ET1 | Electronic transformer 120V to 12V. |
| ET2 | Electronic transformer 277V to 12V. |
| V277 | Transformer, 277V to 12V. |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FLC4 | Full lens cone 4", specify lens type. |
| HD | Hood, MR-16. |
| HL | Hexcell Louver. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
| MP | Microprism lens. |
| UV | UV Filter. |
Specular Cones & Bright Trims | |
| B | Black cone. |
| G | Gold cone. |
| H | Mocha cone. |
| P | Graphite cone. |
| T | Titanium cone. |
| W | Wheat cone. |
| Y | Pewter cone. |
| Z | Bronze cone. |
Softglow® Cones & Trims | |
| S | Softglow® finishes: add S before color letters. e.g. SC for Softglow® clear cone. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Loading...