Model	Application	Aperture	Length	Width	Depth	Cut Out Dimensions	Source	Lumens	Wattage	Page
K7526	Wall Washer	4 1/8"	14 1/4"	14 1/4"	7 1/4"	4 29/32"	MR-16 Low Voltage Lamps	360 to 1202	20W-75W	K4
Click image to enlarge				Click image to enlarge				Click image to enlarge

Optics and Applications

A kicker reflector redirects spill light through a prismatic glass spread lens. Use to light walls, murals, paintings, draperies, tapestries and textured surfaces such as stone, masonry or wood. Matte wall finishes are recommended to reduce specular reflections.

Design Features

The lampholder and lens-cone assembly rotates 360° for perfect alignment to the wall. Torsion springs hold it against the ceiling with constant pressure. Kurt Versen uses a pronged aluminum heat sink and a reflective shield to divert heat from the bi-pin socket. The complete assembly is hinged and drops to facilitate relamping. Maximum ceiling thickness 7/8". Bottom service only.

Finish

A specular clear Alzak cone is standard. Optional colors and Softglow® finishes are available. Housing and structural parts are painted optical matte black to suppress stray light leaks. Steel parts are phosphate conditioned for corrosion resistance before painting.

Transformer

Each fixture has a transformer capable of accommodating MR-16 lamps up to 75W. The primary lead is 120V with a 12V secondary. The transformer is rated 180°C, Class H with a built-in 150°C thermal reset. It can be lowered through the aperture for service. Maximum fixture draw is 85W.

General

Fixtures are pre-wired and thermally protected, UL and C-UL listed for eight wire 75°C branch circuit wiring. Union made IBEW. Luminaire Efficiency Ratings (LER) do not apply to low voltage fixtures.

Accessories

IES Files

Contact factory for Photometric Data

BIM Files

K7526.RFA