Model	Application	Aperture	Length	Width	Depth	Cut Out Dimensions	Source	Lumens	Wattage	Page
K7526FM	Wall Washer	4 1/8"	14 1/4"	15"	7 1/4"	5 7/32"	MR-16 Low Voltage	360 to 1202	20W-75W	FM 3-3
Click image to enlarge				Click image to enlarge				Click image to enlarge

Flush Mount

Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.

Optics and Applications

Lamp and kicker reflector direct light through a prismatic glass lens to wash textured or flat surfaces. Matte finishes are recommended to reduce specular reflections.

Design Features

Optics rotate 360° for proper orientation after installation. A proprietary lampholder features a ceramic socket, aluminum heat sink, reflective heat shield and tilts for relamping. Stainless steel springs retain the lamp. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling from 3/8" to 7/8" thick. Maximum extension is 26". Bottom service only.

Finish

A specular clear Alzak cone is standard. Optional colors in specular or Softglow® finishes are available. Housing and structural parts are painted optical matte black.

Transformer

Each fixture has a magnetic transformer capable of accommodating MR-16 lamps up to 75W. The primary lead is 120V with a 12V secondary. The transformer is rated 180°C, Class H with a built-in 150°C thermal reset. It can be lowered through the aperture for service. Maximum fixture draw is 85W.

General

Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.

Accessories

IES Files

Contact factory for Photometric Data

BIM Files

Please contact Kurt Versen to request Building Information Modeling (BIM) files.