Loading...FM 1-4
P918FM One 18W Triple Tube LampFlush Mount Medium Beam Downlight 4 1/8" Round Conoid Aperture |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| P918FM | Downlight | 4 1/8" | 14 1/4" | 15" | 7 1/4" | 5 1/8" | Philips Triple Tube | 1200 |
18W |
FM 1-4 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
A two reflector optical system maximizes the output of the vertically mounted triple tube lamp. The Philips 18W triple tube lamp is recommended for its photometric compliance with the optical system. The pattern is uniform with a soft edge to blend with adjacent units. Use anywhere as a general all purpose unit.
Design Features
The optical system has a multi-sectioned primary reflector and a parabolic shielding cone. A twist and lock socket prevents the lamp from falling if it is not properly engaged. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
A specular clear Alzak cone is standard. Optional colors and Softglow® finishes are available. Housing and structural parts are painted optical matte black.
Ballast
Programmed rapid start, microprocessor controlled for rated lamp life and end of lamp life protection. Input voltage range is from 120V through 277V. Power factor .98. Starting temperature 0°F (-18°C), THD <10%.
General
Fixture is pre-wired, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring.Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| BD | Ballast disconnect. |
| DM | 5% Lutron SE. Specify watts and volts. |
| EM | Emergency power includes integral charger light and test switch visible through aperture. Battery operation for 90 minutes. |
| F | Ballast fuse. |
| V347 | 347V ballast. |
Specular Cones & Bright Trims | |
| G | Gold cone. |
| H | Mocha cone. |
| P | Graphite cone. |
| T | Titanium cone. |
| W | Wheat cone. |
| Y | Pewter cone. |
| Z | Bronze cone. |
Softglow® Cones & Trims | |
| S | Softglow® finishes: add S before color letters. e.g. SC for Softglow® clear cone. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
