Loading...FMT 7-2
T4104FM One 100 or 150WTungsten Halogen T-4 LampFlush Mount Downlight, 4 1/2" x 8 1/2" Rectangular Aperture |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T4104FM | Downlight | 4 1/2" x 8 1/2" | 14 1/4" | 19 7/8" | 7 1/8" | 9 13/16" x 5 7/16" | T-4 Frosted Tungsten Halogen Mini-can Base | 1550 to 2700 |
100W-150W |
FMT 7-2 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
The T-4 lamp comes in different wattages for various ceiling heights or job requirements. Use anywhere for task or area lighting when high color rendering is required. A microprism spread lens is standard for brightness control from all viewing angles.
Design Features
A sturdy steel housing protects and positions the primary reflector for proper performance. Air flow convection cools the lamp chamber. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housing and structural parts are painted matte black to suppress stray light leaks. The aperture trim is Softglow® clear. A variety of finishes and colors is available.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| FC | Two cross blades for four cell trim (Baffles TC and FC not available with Ball Peen texture) |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
| TC | Single cross blade for two cell trim (Baffles TC and FC not available with Ball Peen texture). |
Electrical | |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FR | Frosting on lens, specify lens type. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture (Baffles TC and FC not available with Ball peen texture). |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
