Loading...FMT 8-3
T4218FM Two 20 or 39W PAR-20 Metal Halide LampsFlush Mount Directional, 4 1/2" x 8 1/2" Rectangular Aperture |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T4218FM | Directional | 4 1/2" x 8 1/2" | 15 1/4" | 19 7/8" | 9 1/2" | 9 13/16" x 5 7/16" | PAR-20 MH | 1600 to 2300 |
20W-39W |
FMT 8-3 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
Spot or flood lamps are available. Two sources can light separate architectural elements or intensify and multiply effects on a single one.
Design Features
Each lamp rotates 360° and tilts 45°. Aiming mechanisms lock securely. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Structural parts are matte black to suppress stray light leaks. The aperture trim is Softglow® clear. A variety of special finishes and colors is available.
Ballast
Two integral, encased, electronic ballasts are standard. They feature quiet operation, thermal protection and lamp shutdown at end of life. Input voltage is 120V or 277V, power factor >.90.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| DP | Fixed downlight position. |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| AOE1 | Auto-On restrike HID electronic 120V (Uses 60W max auxiliary incandescent lamp). |
| AOE2 | Auto-On restrike HID electronic 277V (Uses 60W max auxiliary incandescent lamp). |
| DCE | Double circuiting. |
| EC | Emergency circuit with mini-can sockets and leads. |
| GU | For GU6.5 base, T4 MH lamp. |
| U | Ballast fuse. |
| V347 | 347V ballast, contact factory. |
Lenses & Filters | |
| FF20-2 | Accessory holder for each PAR-20. Holds two accessories. |
| FLT8 | Full lens trim 4 x 8", specify lens type. |
| FR | Frosting on lens, specify lens type. |
| HL | Hexcell Louver. (Requires accessory holder) |
| LL | Linear Lens. (Requires accessory holder) |
| LP | Large Prism lens (Requires accessory holder) |
| MP | Microprism lens. (Requires accessory holder) |
| UV | UV Filter, contact factory. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
