Loading...FMT 9-5
T4506FM One 20-39W T-4 Metal Halide Lamp, One 39 or 70W T-6 Metal Halide Lamp, Parallel to WallT4606FM One 20-39W T-4 Metal Halide Lamp, One 39 or 70WT-6 Metal Halide Lamp, Perpendicular toWallFlush Mount Lens Wall Washers, 4 1/2" x 8 1/2" Rectangular Apertures |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T4506FM | Wall Washer | 4 1/2" x 8 1/2" | 14 1/4" | 19 7/8" | 7 1/4" | 9 13/16" x 5 7/16" | T4 MH, T6 MH, G12 Base | 1600 to 6200 |
20W-70W |
FMT 9-5 |
| T4606FM | Wall Washer | 4 1/2" x 8 1/2" | 14 1/4" | 19 7/8" | 7 1/4" | 9 3/8" x 5 13/16" | T4 MH, T6 MH, G12 Base | 1600 to 6200 |
20W-70W |
FMT 9-5 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
An asymmetric reflector and microprism lens in a rectangular aperture created a visually even pattern on the wall. Parallel or perpendicular models match adjacent rectangles.
Design Features
A vented steel housing is standard. After installation, internal optics can rotate 180° to correct orientation. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housings and structural parts are painted matte black to suppress light leaks. The aperture trim is Softglow® clear. A variety of special finishes and colors is available.
Ballast
Integral, encased, electronic ballast is standard. Features quiet operation, thermal protection and lamp shutdown at end of life. Input voltage is 120V or 277V, power factor >.90.
General
Fixtures are pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| AOE1 | Ballast 120V, auto-on restrike system, 75W max. |
| AOE2 | Ballast 277V, auto-on restrike system, 75W max. |
| EC | Emergency circuit with mini-can sockets and leads. |
| F | Ballast fuse. |
| V347 | 347V ballast, contact factory. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture (Baffles TC and FC not available with Ball peen texture). |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
