Loading...FMT 9-3
T4516FM Two MR-16 Low Voltage Lamps, Parallel to WallT4616FM Two MR-16 Low Voltage Lamps, Perpendicular to WallFlush Mount Lens Wall Washers, 4 1/2" x 8 1/2" Rectangular Apertures |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T4516FM | Wall Washer | 4 1/2" x 8 1/2" | 14 1/4" | 19 7/8" | 7 5/8" | 9 13/16" x 5 7/16" | 12V MR-16 Low Voltage | 360 to 1202 |
20W-75W |
FMT 9-3 |
| T4616FM | Wall Washer | 4 1/2" x 8 1/2" | 15 1/4" | 19 7/8" | 7 5/8" | 9 3/8" x 5 13/16" | 12V MR-16 Low Voltage | 360 to 1202 |
20W-75W |
FMT 9-3 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
A kicker reflector, microprism spread lens and two MR-16 floods create a visually even pattern. Parallel or perpendicular models match the orientation of adjacent rectangles.
Design Features
Proprietary lampholders feature ceramic sockets, aluminum heat sinks, reflective heat shields and tilt for relamping. Stainless steel springs retain each lamp. After installation, internal optics can rotate 180° to correct orientation. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housing is optical matte black. Standard trim is Softglow® clear. Other colors and finishes are available.
Transformer
Each fixture has two magnetic transformers capable of accommodating low voltage lamps up to 75W. The primary lead is 120V with a 12V secondary. Each is rated 180°C, Class H with a built-in thermal reset. It can be lowered through the aperture for service. Maximum fixture draw is 170W with 75W lamps.
General
Fixtures are pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| ET1 | Electronic transformer 120V to 12V. |
| ET2 | Electronic transformer 277V to 12V. |
| V277-2 | Transformers, 277V to 12V. |
| WRL | Wattage restriction label, specify wattage. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture (Baffles TC and FC not available with Ball peen texture). |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
