Loading...FMT 9-6
T4518FM Two 20-39W PAR-20 Metal Halide Lamps, Parallel to WallT4618FM Two 20-39W PAR-20 Metal Halide Lamps, Perpendicular to WallFlush Mount Lens Wall Washers, 4 1/2" x 8 1/2" Rectangular Apertures |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T4518FM | Wall Washer | 4 1/2" x 8 1/2" | 15 1/8" | 19 7/8" | 7 1/4" | 9 13/16" x 5 7/16" | PAR-20 MH Flood | 1000 to 2300 |
20W-39W |
FMT 9-6 |
| T4618FM | Wall Washer | 4 1/2" x 8 1/2" | 15 1/8" | 19 7/8" | 7 1/4" | 9 3/8" x 5 13/16" | PAR-20 MH Flood | 1000 to 2300 |
20W-39W |
FMT 9-6 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
A kicker reflector and microprism spread lens with two PAR-20 MH floods achieve a visually even pattern. Parallel or perpendicular models match the orientation of adjacent rectangles.
Design Features
A vented steel housing is standard. After installation, internal optics can rotate 180° to correct orientation. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housing is optical matte black. Standard trim is Softglow® clear. Other colors and finishes are available.
Ballasts
Two integral, encased, electronic ballasts are standard. They feature quiet operation, thermal protection and lamp shutdown at end of life. Input voltage is 120V or 277V, power factor >.90.
General
Fixtures are pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| AOE1 | Auto-On restrike HID electronic 120V (Uses 60W max auxiliary incandescent lamp). |
| AOE2 | Auto-On restrike HID electronic 277V (Uses 60W max auxiliary incandescent lamp). |
| EC | Emergency circuit with mini-can sockets and leads. |
| F | Ballast fuse. |
| V347 | 347V ballast, contact factory. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture (Baffles TC and FC not available with Ball peen texture). |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
