Loading...FMT 8-4
T6238FM Two PAR-30 or PAR-38 LampsFlush Mount Directional, 6" x 12" Rectangular Aperture |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T6238FM | Directional | 6" x 12" | 15 3/4" | 25 7/8" | 11 3/4" | 13 7/32" x 6 7/8" | PAR-30, PAR-38 | 540 to 1800 |
45W-120W |
FMT 8-4 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
Various beam patterns are available from the wide selection of PAR lamps. Illuminate two different objects from the same fixture and reduce ceiling openings.
Design Features
Each lamp rotates 360° and tilts 35°. After adjustment, aiming mechanisms lock securely. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Structural parts are matte black to suppress stray light leaks. The aperture trim is Softglow® clear. A variety of special finishes and colors is available.
General
Fixture is pre-wired and thermally protected, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| DCT | Double circuiting. |
| V277-2 | Primary Transformers, 277 volt. |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FF20-2 | Accessory holder for PAR-16 and PAR-20 lamps. Holds two accessories. |
| FF38-1 | Accessory holder for each PAR-38. Holds one accessory. |
| FF38-2 | Accessory holder for each PAR-38. Holds two accessories. |
| FLT12 | Full lens trim 6 x 12", specify lens type. |
| HL | Hexcell Louver. (Requires accessory holder) |
| LL | Linear Lens. (Requires accessory holder) |
| LP | Large Prism lens (Requires accessory holder) |
| MP | Microprism lens. (Requires accessory holder) |
| UV | UV Filter, contact factory. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
