Loading...T8
T6242 Two 26-32-42W Triple Tube LampsRectangular Parabolic Splay Trim, 6" x 12" Aperture |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T6242 | Downlight | 6" x 12" | 22" | 13 3/4" | 6" | 12 11/16" x 6 11/16" | Two Triple Tube CFL | 1800 to 3200 |
26W to 42W |
T8 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Optics and Applications
A precise faceted specular primary reflector creates a slightly asymmetric pattern depending upon measurement parallel or perpendicular to the lamps. A microprism spread lens is standard for brightness control.
Design Features
A rigid housing protects all fixture parts. Air flow design assures a cool lamp chamber. The splay trim is held by a constant tension torsion spring assembly. Maximum ceiling thickness 1". Top or bottom service.
Finish
Housing and structural parts are painted matte black. The aperture trim is Softglow® clear. Special finishes, textures and colors are available. See Accessories.
Trim Textures
Kurt Versen has a selection of textured rectangular trims. All textured surfaces are available in anodic special colors.
Ballasts
Fully electronic, microprocessor controlled with variable starting current for inrush protection to assure rated lamp life. Input voltage ranges from 120V through 277V. Operates 26W, 32W or 42W triple tube lamps interchangeably. Power factor .98, starting temperature 0° F (-18° C), THD < 10%. Pre-heat start < 1.0 second. End of lamp life protection. Rated for > 50,000 starts.
General
Fixtures are pre-wired, UL and C-UL listed for eight wire 75°C branch circuit wiring. All products are union made IBEW. Luminaire Efficiency Rating (LER) data is in the photometric directory located in Section Z.
Accessories
Mechanical | |
| FC | Two cross blades for four cell trim (Baffles TC and FC not available with Ball Peen texture) |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
| TC | Single cross blade for two cell trim (Baffles TC and FC not available with Ball Peen texture). |
Electrical | |
| BD | Ballast disconnect. |
| DCT | Double circuiting. |
| DM | 5% Lutron SE. Specify watts and volts. |
| DM2 | Dimming ballasts, two 42W. Specify volts. |
| DM7 | 3% Advance Mark 7. Specify watts and volts. |
| DME | ECO Lutron. Specify watts and volts. |
| DMX | 7% Advance Mark X. Specify watts and volts. |
| EM | Emergency power includes integral charger light and test switch visible through aperture. Battery operation for 90 minutes. |
| F | Ballast fuse. |
| V347 | 347V ballast. |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FR | Frosting on lens, specify lens type. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
