Loading...FMT 7-5
T6242FM Two 26-32-42W Triple Tube LampsFlush Mount Downlight, 6" x 12" Rectangular Aperture |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T6242FM | Downlight | 6" x 12" | 14 1/4" | 22 3/4" | 5 7/8" | 13 7/32" x 6 7/8" | Triple Tube CFL | 1800 to 3200 |
26W-42W |
FMT 7-5 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
A specular, faceted primary reflector and microprism lens create a smooth pattern from a softly luminous aperture.
Design Features
A vented steel housing encloses optical and electrical components and provides a cooler operating environment. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housing and structural parts are painted matte black.The aperture trim is Softglow® clear. Special finishes and colors are available.
Ballast
Programmed rapid start, microprocessor controlled for rated lamp life and end of lamp life protection. Input voltage range is from 120V through 277V. Operates 26W, 32W or 42W triple tube lamps. Power factor .98. Starting tem-perature 0°F (-18°C), THD <10%.
General
Fixture is pre-wired, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring.Union made IBEW.
Accessories
Mechanical | |
| FC | Two cross blades for four cell trim (Baffles TC and FC not available with Ball Peen texture) |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
| TC | Single cross blade for two cell trim (Baffles TC and FC not available with Ball Peen texture). |
Electrical | |
| BD | Ballast disconnect. |
| DCT | Double circuiting. |
| DM | 5% Lutron SE. Specify watts and volts. |
| DM2 | Dimming ballasts, two 42W. Specify volts. |
| DM7 | 3% Advance Mark 7. Specify watts and volts. |
| DME | ECO Lutron. Specify watts and volts. |
| DMX | 7% Advance Mark X. Specify watts and volts. |
| EM | Emergency power includes integral charger light and test switch visible through aperture. Battery operation for 90 minutes. |
| F | Ballast fuse. |
| V347 | 347V ballast. |
| WRL | Wattage restriction label, specify wattage. |
Lenses & Filters | |
| FR | Frosting on lens, specify lens type. |
| LL | Linear Lens. |
| LP | Large Prism lens. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture. |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
