Loading...FMT 9-8
T6542FM Two 26-32-42W Triple Tube Lamps, Parallel to WallT6642FM Two 26-32-42W Triple Tube Lamps, Perpendicular to WallFlush Mount Lens Wall Washers, 6" x 12" Rectangular Apertures |
| Model | Application | Aperture | Length | Width | Depth | Cut Out Dimensions |
Source | Lumens | Wattage | Page |
|---|---|---|---|---|---|---|---|---|---|---|
| T6542FM | Wall Washer | 6" x 12" | 14 1/4" | 22 7/8" | 5 7/8" | 13 7/32" x 6 7/8" | Triple Tube CFL | 1800 to 3200 |
26W-42W |
FMT 9-8 |
| T6642FM | Wall Washer | 6" x 12" | 14 1/4" | 22 7/8" | 5 7/8" | 12 7/8" x 7 5/16" | Triple Tube CFL | 1800 to 3200 |
26W-42W |
FMT 9-8 |
 |
 |
 |
||||||||
| Click image to enlarge | Click image to enlarge | Click image to enlarge | ||||||||
Flush Mount
Kurt Versen’s flush mount fixtures eliminate overlapping flanges and lock into the ceiling for a unique, finished appearance. A clean, uncluttered ceiling emphasizes the attention to detail, enhancing the impact of the interior environment. It is a factory installed option with a proven installation technique.
Optics and Applications
An asymmetric reflector and microprism spread lens achieve a visually even pattern using compact fluorescent lamps. Parallel and perpendicular models match the orientation of adjacent rectangles.
Design Features
A vented steel housing is standard. After installation, internal optics rotate 180° to correct orientation. Flush mount design resists cracking and chipping by mechanically fastening fixture to drywall. To simplify installation, three adjustment mechanisms adapt the fixture to ceiling conditions. Adjustable mounting rails fit different support systems and accommodate ceiling thicknesses from 3/8" to 7/8". Maximum extension is 26". Top or bottom service.
Finish
Housing is optical matte black. Standard trim is Softglow® clear. Other colors and finishes are available.
Ballast
Programmed rapid start, microprocessor controlled for rated lamp life and end of lamp life protection. Input voltage range is from 120V through 277V. Operates 26W, 32W or 42W triple tube lamps. Power factor .98. Starting temperature 0°F (-18°C), THD <10%.
General
Fixtures are pre-wired, UL and C-UL listed for damp location and eight wire 75°C branch circuit wiring. Union made IBEW.
Accessories
Mechanical | |
| R2 | 26" support rails. |
| R5 | 52" support rails. |
Electrical | |
| BD | Ballast disconnect. |
| DM | 5% Lutron SE. Specify watts and volts. |
| DM1 | 1% Lutron. Specify watts and volts. |
| DM2 | Dimming ballasts, two 42W. Specify volts. |
| DM7 | 3% Advance Mark 7. Specify watts and volts. |
| DME | ECO Lutron. Specify watts and volts. |
| DMX | 7% Advance Mark X. Specify watts and volts. |
| EM | Emergency power includes integral charger light and test switch visible through aperture. Battery operation for 90 minutes. |
| F | Ballast fuse. |
| V347 | 347V ballast. |
| WRL | Wattage restriction label, specify wattage. |
Specular Cones & Bright Trims | |
| BR | Bright trim finish. |
Softglow® Cones & Trims | |
| SB | Softglow® black trim. |
| SG | Softglow® gold trim. |
| SH | Softglow® mocha trim. |
| SP | Softglow® graphite trim. |
| ST | Softglow® titanium trim. |
| SW | Softglow® wheat trim. |
| SY | Softglow® pewter trim. |
| SZ | Softglow® bronze trim. |
Finishes - Paint | |
| WT | White trim flange. |
| WHT | White, complete trim. |
Textures for Trims | |
| BP | Ball peen texture (Baffles TC and FC not available with Ball peen texture). |
| DS | Distressed texture. |
| CG | Corrugated texture. |
| WV | Woven texture. |
